Back to AntlerSheds Marketplace EST. AS A FIELD REFERENCE • AS–01
FIELD MANUAL AS–01 • CHAPTER 03

HOW TO SHIP ANTLERS SAFELY

A practical packing checklist for protecting tines, choosing a box, and getting a realistic shipping quote.

THE SHORT ANSWER

Pack antlers so no tine can puncture the container or strike another tine. Protect exposed tips, brace the heavier beam, fill empty space, and use a sturdy box that can survive ordinary handling. Measure the final packed box before quoting shipping, since size can matter as much as weight.

01 / Gather Packing Materials

  • A strong corrugated box or custom-fit double-wall carton
  • Cardboard sleeves or blocks to shield sharp points
  • Firm cushioning, such as foam or tightly crumpled packing paper
  • Strong packing tape and a shipping label
  • Measuring tape, scale, and photos of the packed item

For large irregular antlers, a purpose-built package may be needed. Do not assume an exposed antler wrapped only in film will meet your carrier's acceptance rules.

02 / Protect Every Tine

Wrap each sharp point with a protective cardboard cap and secure it without forcing pressure against the tip. Add padding around fragile forks or chipped areas. If shipping two antlers together, position them so the tips and beams cannot rub, collide, or lever against each other.

FIELD NOTE / DAMAGE PREVENTION

UPS packaging guidance emphasizes protecting protruding or sharp edges. Your package should remain safe to lift, stack, and move through handling equipment. Never leave exposed tips that can tear through a box.

03 / Immobilize the Main Beam

Place cushioning under the thickest part of the antler, then brace it so a drop or sudden stop won't send the full weight onto a tine. Fill all open space. Close the box and gently move it: the contents should not shift. If the box bows, rattles, or has a tip pressing against a wall, repack it.

04 / Measure the Packed Box, Not the Antler

Carriers calculate charges using factors that may include physical weight, dimensions, billable weight, oversize classification, and destination. A long, lightweight antler can cost more to ship than expected. Check carrier calculators using the outside length, width, height, and packed weight, and confirm that the carton is acceptable before promising a price to a buyer.

Before you quoteRecord
Box dimensionsLength × width × height, measured externally
Packed weightEntire package, including cushioning and carton
DestinationZIP code or country, and service level
ValueWhether insurance / declared value options are appropriate
RestrictionsCurrent carrier rules and applicable wildlife-part laws

05 / Seal, Label, and Document

Use reinforced packing tape along all major seams, place a legible shipping label on a flat surface, and include a copy of the destination information inside the parcel. Photograph the antlers before packing and the completed packaging. Retain the receipt and tracking number.

06 / Check Carrier and Legal Requirements

USPS provides current packaging and size-measurement instructions; UPS publishes packing guidance. These general guidelines do not guarantee a particular package will be accepted. For international shipments, or antlers attached to skulls, additional wildlife documentation or restrictions may apply. Confirm with the relevant agency and carrier before shipping.

07 / Final Packing Checklist

  1. Confirm species and lawful possession or sale.
  2. Protect every tip and brace the beam.
  3. Keep multiple antlers from touching or moving.
  4. Measure and weigh the completed package.
  5. Compare carrier service and cost before agreeing to a delivered price.
  6. Save photos and send tracking to the buyer.

For help preparing a listing, see Where to Sell Shed Antlers Online.

References & sources

Shipping charges and carrier acceptance policies change; confirm current requirements before offering delivery.

END OF FIELD REFERENCE 03.2← RETURN TO FIELD INDEX